Agency Power
Agency Power High Flow Air Intake Kit Polaris RZR RS1 | Red Cross Brace
Agency Power High Flow Air Intake Kit Polaris RZR RS1 | Red Cross Brace
Couldn't load pickup availability
The Agency Power High Flow Air Intake System for the Polaris RZR RS1 is a great upgrade to help improve air flow from the intake to the engine. Not only does the intake gain very respectable horsepower, it also improves the drivability through the entire RPM range. The air intake kit features a roto-molded plastic tube design that faces towards the rear of the vehicle. Each intake includes a Polaris mesh inspired cross brace and our high flow dry filters. The new intake tubes and filters replace the factory intake system that runs to the roof of the RS1. This new design aids in increased air flow while filtering out more particulates than stock. As tested on the dyno, Agency Power saw a peak gain of 8 horsepower from just the air intake and an 11 horsepower gain with our custom VR Tuned ECU Flash. The easy modification of adding the Agency Power Air Intake System will help your Polaris RZR RS1 breathe better for greater performance. This simple upgrade is a must have for those running aftermarket roll cages and need an air intake solution.
The Agency Power cold air intake has been engineered from the ground up to be a direct replacement for the factory Polaris RZR RS1 intake. Starting from 3D printed components and real world desert testing, each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. The custom high flow Agency Power air filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filters to be purchased separately.
The new Agency Power roto-molded tubes replace the factory intake pipe system. The dual roto-molded plastic tubes have been designed not only to enhance the performance of your RS1 but also an easy installation to replace the factory air intake system. Each tube has a smooth inside that helps eliminate any turbulent air flow. The intake tubes get added support from a cross brace that comes in matte black, gloss white or red. The intake tube is designed to be strong and durable as the factory tube allowing it to hold up to the harsh elements. The dual filters mount uniquely on the intake tubes to grab more air and add great styling.
Features:
- Lightweight Roto Molded XLPE Plastic Constructed Tubes
- Dual Black Intake Tubes
- Unique Filter Mounting
- High Flow and Re-Usable Air Filters
- Gains of 8-11 Horsepower
- Cross Bar Available in Matte Black, Gloss White and Gloss Red
- Bolt On
- Easy Installation
Fitment:
- 2018+ Polaris RZR RS1
Note:
- For maximum performance, order the VR Tuned ECU Flash as well.
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears
- Understanding cleaning and filter technology
- All Agency Power parts come with a limited lifetime warranty
Shipping & Returns
Shipping & Returns
Products ship from our Miami facility or drop ship direct from our Suppliers
Orders placed before 1pm PST are typically will send the same day. Most orders placed after that time are will send the following business day.
This is not a guarantee. If you have specific shipping requests or needs please contact us at sales@bills-exhausts.com prior to purchasing and we will do our best to assist you.
If an item is back ordered from the manufacturer you will be notified by us. FYI – We don’t like it when this happens any more than you do.
We will try and help as best we can with back orders
A TRACKING NUMBER will be send to you via email or text after purchasing .
SHIPMENTS WITHIN THE US
FREE STANDARD SHIPPING is available in all US lower 48 states, APO addresses, and Puerto Rico via USPS or UPS. (*Exceptions apply for Alaska and Hawaii.)
Free standard shipping means we will select an option that gets you your parts as soon as possible while still being economically priced.
*Shipments to Alaska and Hawaii are free as long as the parts will fit in a USPS Priority Mail Flat Rate box or envelop.
For any other type of shipping there will be a charge.
About pre-orders:
When you order PRE-ORDER it means that you can purchase it before the official release date and then, you just wait for the shipping Usually pre-orders takes from 1-6 weeks depending the brand and the product.
Pre-orders can cancel ONLY in 3 days from the day you pay ,after that we cannot cancel and refund your order so please make sure you can wait for it.
Contact us when ordering or we will contact you to go over rates and times.
INTERNATIONAL SHIPMENTS
WE SHIP WORLDWIDE Shipping rates outside the US are based upon destination and weight.
International shipping charges do not include any fees or duties required by your country.
If you have questions about these fees or duties contact us prior to ordering and we can assist you.
Delivery times for international shipments are typically 5 to 9 business days, but this can vary depending on your country’s customs procedures.
Orders delayed by customs are not something we can control or change.
ALL international orders(Includes CANADA and Puerto Rico) needed to be ship from our location in Miami Florida.
Most of International orders cannot drop ship from supplier's warehouses(Except on some specific Brands)
It takes 2-5 business days parts arrive here, after that we will email you a tracking number
PAYMENT METHODS
We accept Visa, Mastercard, AMEX, and Discover credit cards by Paypal , as well as debit cards with a Visa or Mastercard logo.
Contact us at sales@bills-exhausts.com if you have any questions.
*Products shipped within the state of Florida are subject to a 7% sales tax.
RETURN POLICY
WE ACCEPT RETURNS for most of the items.
The return process must be initiated within 15 days of your order being delivered.
Return orders that not delivery for rezone of wrong address ,OR deny except package are also apply to RETURN POLICY of 15 days.
If you haven't reported an item as lost within 30 days, you'll be responsible for paying for it.
Warranty claims are not the same as returns. They are handled differently.
If you think you have a warranty claim contact us at sales@bills-exhausts.com
Claims for missing or damaged items in an order must be placed within 48 hours of delivery of your order.
Same supplier request 15-25% restock fee plus the postage of the shipping back,that we will hold from the refund of a return, we will try to avoid that and we try to hold products in out own inventory most of the times.
Any new items must be returned in the original box/packaging including static guards on shields, vendor hang tags, bags, hardware, etc. All hardware must be in original packaging and unopened. Items must be in restockable condition
