Graves motorsports yamaha fz10 mt-10 exhaust valve cat eliminator exhaust evr
Graves motorsports yamaha fz10 mt-10 exhaust valve cat eliminator exhaust evr
Graves Motorsports Yamaha FZ10 / MT-10 EVR Cat Eliminator Exhaust with (Exhaust Valve Race – Butterfly Valve Technology). Requires FTEcu software purchased separately to use the EVR activation map code included with the sale of the exhaust. Graves' precise engineering develops precision products that are designed to outlook, outperform and outlast the competition. Graves Exhaust systems are designed for the elite rider seeking top of the line performance, fit, finish and value. This exhaust system was developed using the same technology that has powered the Graves Racing Team to 23 Professional AMA National Championships including 8 Superbike Championship titles and 3 Side x Side Pro Titles (Pro Stock and Pro Mod UTV).
The exhaust valve race uses the factory exup hardware alongside the Graves EVR valve and custom mapping to improve low to mid-range rpm and small throttle opening torque and drivability to create and better powerband and ride. This is particularly effective on exhaust systems with shorter silencers that can rob your bike of small throttle responsiveness while reducing the sound to acceptable levels. We did not allow compromise in the development of this system. Material diameters and lengths are optimized for maximum power output throughout the throttle and RPM range.
We use the same 1.00 MM think wall high heat grade Titanium tubing used on our Superbikes. This material is designed special for maximum durability and oxidation resistance up to 800*Celsius / 1472*Fahrenheit. It is designed to live at almost twice the temperature of normal Grade2 Titanium. The tubes are precision bent and cut with the latest equipment available. The tubing is then welded in fixtures designed so that repeat-ability is second to none. It comes with a single Lambda receiver bung for on track data logging or Dyno tuning. The spring tabs are made from 4MM thick Titanium wire for long life.
The 265mm silencer is one piece with the tail pipe welded to the deep draw tapered Titanium entrance cap and attaches to the collector with a 60.5 MM machined Titanium joint for a perfect fit every time. The Collector attaches to the stock mount under the frame with a Titanium tab that has an 8MM machine Titanium nut welded to the tab. The silencer attaches to the motorcycle with a strapless aluminum bracket that is black powder coated and integrated into the silencer. The silencer sleeve is made of Carbon fiber or Titanium that attaches to the titanium end caps with stainless aircraft grade rivets and Titanium silencer bands. The inter core tube is made of stainless that slips over the entrance and into the exit cap that is a stamped from Titanium and welded to a 60* slash cut Titanium tube covered with a Carbon Fiber beauty cover.
This system performs like our superbike pipe and shows like jewelry.
What Chuck Graves the president of Graves Motorsports had to say about the release of Graves’s newest line of exhaust systems, EVR and the technology behind it:
- “The EVR or Exhaust Valve Type R is and electronically controlled valve that improves drivability at small throttle and low RPM ranges where it matters most to the rider. The systems can also be utilized to reduce sound by a significant amount without reducing maximum power output.”
- What makes the Graves EVR different than the stock exhaust valves that racers commonly remove when the stock system is replaced with an aftermarket race system?
- That's pretty simple, we install it in a race system and tune the electronics to maximize efficiency. The current trend of sport bike enthusiasts has been attracted to short silencers simply for looks. Power output and drivability has been sacrificed exclusively for the trendy look. Secondly the sound levels of many of these systems has reached the level of irresponsible and annoying for even the youngest riders. The aftermarket has responded with sound inserts to bring these short power robbing systems to an acceptable level. The real drawback to this is that once the sound inserts are installed the rider can now feel the negative effect of the system and the overall performance. In most cases, I'd say 99.9% of all motorcycles that I have tested, the power output and throttle response is now far worse than the stock exhaust.
- With the EVR by Graves we solve all 3 issues, the power output, throttle response and the sound.
- Who else uses this system on their race pipes?
- Only Factory teams are using it now and most of them are well hidden!
- Why hasn't this been done by the aftermarket before?
- Again, that’s pretty simple. Cost! To drive the valve requires hardware and software. At a minimum, you need an ECU that is capable and a motor. The emergence of ECU flashing has given us the ability to do this at a reduced cost because we can now control the stock ECU motor controls. We have designed our EVR systems to accept the stock motor and cables. This makes for a clean setup.
- So, is the FTECU flashing system is required to optimize the EVR exhaust system?
- That is correct. Anytime you replace the stock exhaust system with an aftermarket racing system it requires changing the fueling. In addition to air fuel requirements, the modern motorcycle engine control systems cannot be optimized by piggyback systems. Now the flashing of the ECU is common place. Graves has partnered with FTECU to manage these strategies to enhance our exhausts systems performance just as a Factory team would do.
- What if I already have a flashed ECU?
- What Graves has been telling our customers is that they should purchase the FTECU flashing kit when they purchase an exhaust from Graves. Graves provides maps for the user to install in their motorcycles ECU. We tell them that by having the FTECU flashing system in their tool box they can update their ECU whenever Graves publishes a new map. If they have the system already then, an updated map is all that they will need.
- 265mm Length New Diamond Shaped Silencer Design (Carbon Fiber Silencer with Carbon End Cap) designed to match the FZ10's "naked line.”
- Silencer mounts directly to the OEM rearset bracket using a stealth integrated "strapless" bracket built into the silencer
- Constructed from Aerospace grade hi heat Titanium alloys
- 1 Auto Tuner Style Lambda sensor receiver comes standard (OEM dual sensor mounts up front are eliminated for a smoother flowing exhaust). When using any Graves performance system on the FZ10 / MT10 Flash Tune products are recommended to enhance the bikes performance everywhere. The most effective tune on this setup does not utilize the stock lambdas at all).
- Advanced welding process showcases laser perfection welds
- 11 lbs. lighter than stock
- Performs like it looks and looks like it performs!!
Stock Silencer + Cat System Weight = 17.4lbs: Cat Eliminator System Weight = 6.5 lbs. (10.9lb. savings)
- Stock sound 80 DBA @ idle 91 @ 5000
- Graves Cat Elim EVR (265mm) 86 DBA @ idle 98 @ 5000 (with sold separately sound insert) Graves Cat Elim EVR (265mm) 87 DBA @ idle 101 @ 5000 (No sound insert)
- Standard Cat Elim with (265mm) 92 DBA@ idle 109 @ 5000 (no sound insert)
Fitment: Yamaha FZ10 2017 / MT-10 2018-2019
Shipping & Returns
Shipping & Returns
Products ship from our Miami facility or drop ship direct from our Suppliers
Orders placed before 1pm PST are typically will send the same day. Most orders placed after that time are will send the following business day.
This is not a guarantee. If you have specific shipping requests or needs please contact us at firstname.lastname@example.org prior to purchasing and we will do our best to assist you.
If an item is back ordered from the manufacturer you will be notified by us. FYI – We don’t like it when this happens any more than you do.
We will try and help as best we can with back orders
A TRACKING NUMBER will be send to you via email or text after purchasing .
SHIPMENTS WITHIN THE US
FREE STANDARD SHIPPING is available in all US lower 48 states, APO addresses, and Puerto Rico via USPS or UPS. (*Exceptions apply for Alaska and Hawaii.)
Free standard shipping means we will select an option that gets you your parts as soon as possible while still being economically priced.
*Shipments to Alaska and Hawaii are free as long as the parts will fit in a USPS Priority Mail Flat Rate box or envelop.
For any other type of shipping there will be a charge.
When you order PRE-ORDER it means that you can purchase it before the official release date and then, you just wait for the shipping Usually pre-orders takes from 1-6 weeks depending the brand and the product.
Pre-orders can cancel ONLY in 3 days from the day you pay ,after that we cannot cancel and refund your order so please make sure you can wait for it.
Contact us when ordering or we will contact you to go over rates and times.
WE SHIP WORLDWIDE Shipping rates outside the US are based upon destination and weight.
International shipping charges do not include any fees or duties required by your country.
If you have questions about these fees or duties contact us prior to ordering and we can assist you.
Delivery times for international shipments are typically 5 to 9 business days, but this can vary depending on your country’s customs procedures.
Orders delayed by customs are not something we can control or change.
We accept Visa, Mastercard, AMEX, and Discover credit cards by Paypal , as well as debit cards with a Visa or Mastercard logo.
Contact us at email@example.com if you have any questions.
*Products shipped within the state of Florida are subject to a 7% sales tax.
WE ACCEPT RETURNS for most of the items.
The return process must be initiated within 14 days of your order being delivered.
Return orders that not delivery for rezone of wrong address ,OR deny except package are also apply to RETURN POLICY of 14 days.
If you haven't reported an item as lost within 30 days, you'll be responsible for paying for it.
Warranty claims are not the same as returns. They are handled differently.
If you think you have a warranty claim contact us at firstname.lastname@example.org
Claims for missing or damaged items in an order must be placed within 48 hours of delivery of your order.
Same supplier request 15-25% restock fee plus the postage of the shipping back,that we will hold from the refund of a return, we will try to avoid that and we try to hold products in out own inventory most of the times.