Graves Motorsports
Graves exhaust works2 zx-10r / zx-10rr 16-23 carbon full exhaust system EXK-19ZX1-FTCW2
Graves exhaust works2 zx-10r / zx-10rr 16-23 carbon full exhaust system EXK-19ZX1-FTCW2
Couldn't load pickup availability
This product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited.
We did not allow compromise in the development of this system. Material diameters, lengths, the silencer core size and length are optimized for maximum power output throughout the throttle and RPM range. Combined with Graves’ exclusive flash tune map this system produces a solid 15+ HP in the midrange and 25+ on the top of the horsepower charts. This tune also removes any computer error codes the bike will have when installing performance exhausts.
We use the same 1.00 MM thick wall high heat grade Titanium tubing used on our performance Superbike exhausts. This material is designed special for maximum durability and oxidation resistance up to 800*Celsius / 1472*Fahrenheit. It is designed to live at almost twice the temperature of normal Grade2 Titanium. The tubes are precision bent and cut with the latest equipment available. The tubing is then welded in fixtures designed so that repeat-ability is second to none. It comes with a single Lambda receiver bung for on track data logging or Dyno tuning. The spring tabs are made from 4MM thick Titanium wire for long life.
The silencer is has a Titanium entrance cap and attaches to the Carbon silencer body. The silencer is hung with a carbon fiber hanger strap for the cleanest look possible. The silencer body attaches to the end caps with stainless aircraft grade rivets and Titanium silencer bands. The inter core tube is made of stainless that slips over the entrance and into the exit cap that is made of Titanium and accented with a titanium beauty cover with a 60* slash cut.
- New Diamond Shaped Can Design with tapered entrance (Carbon with Titanium end cap) designed to match the ZX10's body line.
- Constructed from Aerospace grade hi heat Titanium alloys
- Single Lambda sensor comes standard
- Advanced welding process showcases laser perfection welds
- Long Tapers with Precision fitment and "butt" welds
- Flanges are made from 7075 hard anodized aluminum. Built to last!
- Includes hanger mount to replace passenger peg mount
10 pound weight saving over stock
DB at Idle 103 / DB at 5000rpm : 104.5 @ 5000rpm ( Completely Stock DB @ idle 79 DB @ 5000 90.5 )
Fitment: Kawasaki ZX10R / ZX-10RR 2016-2023
Shipping & Returns
Shipping & Returns
Products ship from our Miami facility or drop ship direct from our Suppliers
Orders placed before 1pm PST are typically will send the same day. Most orders placed after that time are will send the following business day.
This is not a guarantee. If you have specific shipping requests or needs please contact us at sales@bills-exhausts.com prior to purchasing and we will do our best to assist you.
If an item is back ordered from the manufacturer you will be notified by us. FYI – We don’t like it when this happens any more than you do.
We will try and help as best we can with back orders
A TRACKING NUMBER will be send to you via email or text after purchasing .
SHIPMENTS WITHIN THE US
FREE STANDARD SHIPPING is available in all US lower 48 states, APO addresses, and Puerto Rico via USPS or UPS. (*Exceptions apply for Alaska and Hawaii.)
Free standard shipping means we will select an option that gets you your parts as soon as possible while still being economically priced.
*Shipments to Alaska and Hawaii are free as long as the parts will fit in a USPS Priority Mail Flat Rate box or envelop.
For any other type of shipping there will be a charge.
About pre-orders:
When you order PRE-ORDER it means that you can purchase it before the official release date and then, you just wait for the shipping Usually pre-orders takes from 1-6 weeks depending the brand and the product.
Pre-orders can cancel ONLY in 3 days from the day you pay ,after that we cannot cancel and refund your order so please make sure you can wait for it.
Contact us when ordering or we will contact you to go over rates and times.
INTERNATIONAL SHIPMENTS
WE SHIP WORLDWIDE Shipping rates outside the US are based upon destination and weight.
International shipping charges do not include any fees or duties required by your country.
If you have questions about these fees or duties contact us prior to ordering and we can assist you.
Delivery times for international shipments are typically 5 to 9 business days, but this can vary depending on your country’s customs procedures.
Orders delayed by customs are not something we can control or change.
PAYMENT METHODS
We accept Visa, Mastercard, AMEX, and Discover credit cards by Paypal , as well as debit cards with a Visa or Mastercard logo.
Contact us at sales@bills-exhausts.com if you have any questions.
*Products shipped within the state of Florida are subject to a 7% sales tax.
RETURN POLICY
WE ACCEPT RETURNS for most of the items.
The return process must be initiated within 14 days of your order being delivered.
Return orders that not delivery for rezone of wrong address ,OR deny except package are also apply to RETURN POLICY of 14 days.
If you haven't reported an item as lost within 30 days, you'll be responsible for paying for it.
Warranty claims are not the same as returns. They are handled differently.
If you think you have a warranty claim contact us at sales@bills-exhausts.com
Claims for missing or damaged items in an order must be placed within 48 hours of delivery of your order.
Same supplier request 15-25% restock fee plus the postage of the shipping back,that we will hold from the refund of a return, we will try to avoid that and we try to hold products in out own inventory most of the times.
